How to Download and Install Driver for JINKA 1351 Cutting Plotter
If you are looking for a reliable and easy-to-use cutting plotter, you might want to consider the JINKA 1351 model. This device can cut various materials such as vinyl, paper, cardstock, and more with high precision and speed. However, before you can use it, you need to download and install the driver for your computer.
A driver is a software that allows your computer to communicate with the cutting plotter and control its functions. Without a driver, you will not be able to use the JINKA 1351 cutting plotter properly. Therefore, it is important to download and install the correct driver for your device.
In this article, we will show you how to download and install the driver for JINKA 1351 cutting plotter in a few simple steps. Follow these instructions carefully and you will be able to use your cutting plotter in no time.
driverjinka1351download
DOWNLOAD: https://urlin.us/2tGYsB
Step 1: Download the Driver
The first step is to download the driver for JINKA 1351 cutting plotter from the official website of JINKA Indonesia[^2^]. This website provides links to download drivers for different models and versions of JINKA cutting plotters. You need to choose the one that matches your device and operating system.
For example, if you have a JINKA 1351 cutting plotter that only cuts (not contour cuts), you need to download the driver from this link: https://drive.google.com/drive/folders/1kiUSHrjBs25_WLGYLWA-h15UBCa5PNtB?usp=sharing[^2^]. If you have a JINKA 1351 cutting plotter that can do semi-auto contour cut, you need to download the driver from this link: https://drive.google.com/drive/folders/1M0VUjET4zhtc3ImKoLtxotBMYVG1ugJO?usp=sharing[^2^]. And so on.
Make sure you download the correct driver for your device and operating system. If you are not sure which one to choose, you can contact the customer service of JINKA Indonesia for assistance.
Step 2: Install the Driver
The second step is to install the driver for JINKA 1351 cutting plotter on your computer. To do this, you need to follow these steps:
Extract the downloaded driver file using a software such as WinRAR or 7-Zip.
Open the extracted folder and find the setup.exe file.
Double-click on the setup.exe file and follow the instructions on the screen.
Choose the language, destination folder, and other options as prompted.
Wait for the installation process to complete.
Restart your computer if required.
After installing the driver, you should be able to see a new icon on your desktop or taskbar that represents the JINKA 1351 cutting plotter. You can also check if the driver is installed correctly by going to Device Manager and looking for JINKA 1351 under Ports (COM & LPT).
Step 3: Connect the Cutting Plotter
The third step is to connect the JINKA 1351 cutting plotter to your computer using a USB cable. To do this, you need to follow these steps:
Turn on your computer and log in as an administrator.
Turn on your JINKA 1351 cutting plotter and make sure it is in online mode.
Connect one end of the USB cable to the USB port of your computer and the other end to the USB port of your cutting plotter.
Wait for your computer to detect and recognize your cutting plotter.
If a message pops up asking you to install a new hardware or software, click on Cancel or No.
After connecting the cutting plotter, you should be able to see it as an available device in your software such as CorelDRAW or Artcut. You can also test if it works by sending a simple cut command 0efd9a6b88
https://www.kawaiistaciemods.com/group/pol/discussion/afaab406-e6f9-4b6d-8e8a-7da11d6b9aab